Our skateboard risers guide will help you to know everything. Skaters use riser pads not only for wheel bite. Riser pads also provide a lot of advantages.
However, there are some disadvantages as well. Skaters face a common and significant problem named wheel bite. As you already know, it occurs when the wheel rubs the deck.
As a result, you may fall from the skateboard and get seriously injured. However, riser pads can prevent wheel bites. That must say, it is the main advantage of riser pads. Skateboarding is the game of balancing. In other words, you have to be good at balancing to be a good skater. However, riser pads help to keep an outstanding balance of the skateboard. You can also keep balance while doing stunts on your skateboard.
To clarify, taking a sharp turn during wheel bites can be dangerous. You might be injured seriously. However, riser pads increase the height and prevent wheel bites. So, you can safely take a sharp turn on your skateboard. Wheel rubs the deck during wheel bite. The doorjamb shape of angled risers not only raises your trucks, but also fixes them at an angle from your deck.
You can install them so they are angled away from the center, or towards the center. Adding wedge risers changes the angle of the kingpin and the pivot point, which means that you can increase or decrease how much your trucks turn depending on which direction you face the angled risers.
To increase your turn capability, install the wedge risers so the thick part is closer to the center of the board. You can also flip the direction of your wedges to create different effects. For example, if you face both angled risers so the thick part faces the center, you can increase front turn capabilities while decreasing rear turn capabilities.
Both angled and rectangular risers are available in drop-thru style. Many manufacturers have also put a creative spin on riser pads in the last few years by adding interesting design cutouts on their riser pads. Not only does it look cool, but it also decreases the total weight of your skateboard.
Additionally, some skateboarders like to mix and match rectangular and angled riser pads. For instance, an angled riser with thick part facing the center and a flat riser on the back can increase your front turn steering capabilities while stabilizing the back, and vice-versa.
Be aware that no matter what riser pad shape you choose, you will need to buy longer hardware to accommodate the extra height!
Consult our helpful hardware size calculator above. When you install riser pads, you of course want to install four screws, one on each corner. Shock Pads are made of rubber and designed to reduce shock and vibration for a smoother ride. Unlike riser pads — using shock pads can also reduce your speed.
Rectangular riser pads are the most common shape for skateboarders. Rectangular pads are standard, they will increase your deck height and decrease the shock felt by the rider. Remember though, the higher your deck is from the ground — the less maneuverable it will be. The wedge shape of angled riser fixes your trucks at an angle from your deck while also raising your deck height.
Angled rises can be angled in both directions which means that you can increase or decrease how much your skateboard trucks turn depending on the direction you face your angled riser. If you want to increase your turn capability, install the angled riser so that the thickest part is closer to the centre of the deck. Riser pads Plastic. As was mentioned, installing riser pads between the truck baseplate and the board will lift the deck higher. If you are used to riding without them, risers of any size will be noticeable.
Much taller, and your board will begin to feel top heavy and unstable. Lifting the board away from the trucks automatically increases the distance from the top of the wheels to the bottom of the deck. Wheel bite prevention. The bottom of the deck gets gradually closer to the tops of the wheels as you lean into a turn. Lean too far and the wheels can rub on the surface of the deck, acting like brakes.
This is called wheel bite. Do not ignore those black marks burned above your wheels. Sooner or later, wheel bite will stop you cold and throw you to the concrete. Risers increase the space between the wheels and the deck, preventing the board from contacting the wheels in the first place. Allows room for taller wheels. There are many reasons to consider opting for taller wheels.
0コメント